SpunMed PPE is Personal Protective Equipment (PPE) which is made from Poly PPE Spunbond material.
Charactetristics and advantage of SpunMed PPE:
- Economical price
SpunMed PPE has already passed these following tests :
- ANSI AAMI PB70 AATCC 127
- ANSI AAMI PB70 AATCC 150
- ANSI AAMI PB70 AATCC 42
Types of SpunMed PPE
1. Value PPE
These are non laminated full body covers nonwoven with a hood. These suits are made in clean factory which maintains the health protocol regulations to ensure its hygiene.
2. Standard PPE
These are laminated full body covers nonwoven with a hood. These have an extra coat of protection in the form of lamination. These suits are made in clean factory which maintains the health protocol regulations to ensure its hygiene.
3. Premium PPE
Premium PPE is breathable laminated Personal Protective Equipment with tape which gives maximum convenience and safety. These suits are made in clean factory which maintains the health protocol regulations to ensure its hygiene.
Spunbond are made in one continuous process. Fibers are spun and then directly dispersed into a web by deflectors or can be directed with air streams. This technique leads to faster belt speeds, and cheaper costs. Several variants of this concept are available, such as the REICOFIL machinery. PP spunbonds run faster and at lower temperatures than PET spunbonds, mostly due to the difference in melting points
Spunbond has been combined with melt-blown nonwovens, conforming them into a layered product called SMS (spun-melt-spun). Melt-blown nonwovens have extremely fine fiber diameters but are not strong fabrics. SMS fabrics, made completely from PP are water-repellent and fine enough to serve as disposable fabrics. Melt-blown is often used as filter media, being able to capture very fine particles. Spunlaid is bonded by either resin or thermally. Regarding the bonding of Spunlaid, Rieter has launched a new generation of nonwovens called Spunjet. In fact, Spunjet is the bonding of the Spunlaid filaments thanks to the hydroentanglement.